EVEREST 110GA
EVEREST 110GA Bluetooth-teknik - Image

Bluetooth-teknik

Njut av all din musik trådlöst

EVEREST 110GA Få hjälp av Google Assistant - Image

Få hjälp av Google Assistant

Du aktiverar enkelt Google Assistant med en knapptryckning på fjärrkontrollen för att ta full kontroll över musiken eller ta emot aviseringar utan att använda telefonen.

EVEREST 110GA Legendary JBL Pro Audio-ljud - Image

Legendary JBL Pro Audio-ljud

Njut av samma överlägsna upplevelse och otroliga JBL-ljud som JBL har levererat till konserthallar, studior och vardagsrum i 70 år.

Funktioner

EVEREST 110GA Ekofri mikrofon - Image

Ekofri mikrofon

Inbyggd mikrofon med ekofri funktion för  handsfree-samtal i kristallklar kvalitet.

EVEREST 110GA 8 timmars batteritid, snabb uppladdning på 2 timmar - Image

8 timmars batteritid, snabb uppladdning på 2 timmar

Det inbyggda batteriet som laddas med mikro-USB ger upp till 8 timmars speltid med snabb uppladdning på endast 2 timmar

EVEREST 110GA Bekväma öronproppar - Image

Bekväma öronproppar

Ergonomiska lurar med proppari tre storlekar garanterar perfekt passform och perfekt komfort

EVEREST 110GA Enkel styrning - Image

Enkel styrning

Fjärrkontroll på kabeln innebär enkel styrning av musiken och handsfree-samtal

Detaljer & Nedladdningar

Item# JBLV110GABTSIL

Beskrivning

Trådlös upplevelse. Ojämförlig komfort.

JBL Everest™ 110GA är trådlösa in-ear-hörlurar med Legendary JBL Pro Audio-ljud som ger en dynamisk akustisk upplevelse i upp till 8 timmar på en enda laddning, med snabb uppladdning på bara 2 timmar. Nu när Google Assistant är inbyggd kan du ta full kontroll över din musikupplevelse med din röst och ta emot aviseringar utan att använda telefonen. Du aktiverar enkelt Google Assistant med en knapptryckning på fjärrkontrollen. Den ergonomiska designen anpassar sig efter hela örats kontur och sitter perfekt vilket ger en unik komfort och många timmars skön musik. Njut av handsfree-samtal med kristallklar kvalitet med hjälp av den inbyggda mikrofonen med ekofri funktion. Våga lyssna.

Allmänna specifikationer

Elementstorlek (mm)
5.8

Ljudspecifikationer

Elementkänslighet vid 1 kHz/1 mW (dB)
96dB / 1kHz, 1mW
Dynamiskt frekvensomfång (Hz)
10Hz – 22kHz
Impedans (ohm)
32.0
Antal element per öra
1.0

Mått

Vikt (g)
15.3
Vikt (oz)
0.56

Specifikationer, styrning och anslutning

Bluetooth-version
4.1
Bluetooth-profiler
HFP v1.7, HSP v1.2, A2DP v1.3, AVRCP v1.6
Bluetooth-frekvens
2.402GHz – 2.48GHz
Bluetooth-sändarmodulering
GFSK, π/4DQPSK, 8-DPSK
Bluetooth-sändareffekt
≤4 dbm(EIRP)

Batteri

Taltid (timmar)
8.0
Laddtid (timmar, från tomt)
2
Max speltid (timmar)
8

Egenskaper

Legendariskt JBL Pro Audio
Ja
Handsfree-samtal
Ja
Flerpunktsanslutning
Ja
Trådlös
Ja
Snabbladdning
Ja
Uppladdningsbart batteri
Ja

Vad innehåller förpackningen?

  • Örontoppar i tre storlekar
  • Laddningskabel
  • Väska
  • 1 x Garantisedel/varning
  • 1 x Snabbguide/säkerhetsblad
Vad innehåller förpackningen?

Dokument och hämtningar

Omdömen och FAQ

Kundrecensioner

Frågor och svar

What IPX are these? I am looking for a running pair and wonder if these are rainproof or at the least, sweatproof.

Asked by: suth97
The JBL Everest 110GA is not a sweatproof/waterproof headphone and are not designed for rigorous workouts. Over exposure to sweat and water can compromise the controls . We recommend looking at our available athletic headphone models at http://www.jbl.com/sport-headphones/
Answered by: Mario at Customer service
Date published: 2021-06-06

What cable is the charging cable please? If it's not USB type C then this is an instant no go.

Asked by: E4kenndr
Hi! Unfortunately, all of our wireless headphone comes with the standard micro USB port for charging.
Answered by: Nick F
Date published: 2021-06-06

I fully charged the headphones and successfully paired them to my phone, the battery percentage always says 20% and the headphones turn off within a few minutes.

Asked by: orion49
Please try these troubleshooting steps on our support page article "Battery and Charging Issues" for us to isolate what's happening with your JBL Everest 110GA. https://support.jbl.com/us/en/
Answered by: Rhae
Date published: 2021-06-06

My phone just upgraded the firmware on my 110ga ... it said new features are available, what features? I dont know what version it installed, but it installed on 12/26/2018

Asked by: tsabonis
We would like to work with you directly to help you with your issue. Please submit a case request at https://www.jbl.com/support-contact.html and the Customer Service Team will be more than happy to assist you.
Answered by: Mario at Customer service
Date published: 2021-06-06

Do they have ambient noise technology? Where you can specify hearing the outside world or voice?

Asked by: maezing
The JBL 110GA features echo cancellation so you can enjoy crystal clear, hands-free calls using the built-in microphone without any echos.
Answered by: Mario at Customer service
Date published: 2021-06-06

The question was about active noise cancellation not echo cancellation , have they got ANC ?

Asked by: Neculai
Thank you for your question. No, the Everest 110GA do not come provided with Active Noise Cancellation. Should you wish to receive further support, you may contact the Harman Customer Support team by telephone, email or chat in order to receive direct assistance. Please see https://uk.harmanaudio.com/support-contact.html#ns for further details. Thank you.
Answered by: Frank K
Date published: 2021-06-06

How do I pair the headphones to a second device?

Asked by: Dark
Hi! You can simply press the Bluetooth button (center button) on the earphone for about 3 seconds to pair the 1st device to the JBL Everest 110GA. Afterwards, repeat the same process for the 2nd device. Then you can simply switch between the 2 devices. Please note that only a maximum of 2 devices can be connected.
Answered by: Nick F
Date published: 2021-06-06

what botton do I press to turn on the bluetooth? When it is red does that mean it wont connect to the phone?

Asked by: ksmooth
You need to press on the middle button of the Everest 110GA for 3 seconds to put the unit in pairing mode. The red light indicates that it's currently charging. You'll need to take it out of charging in order for you to get it paired.
Answered by: Mario at Customer service
Date published: 2021-06-06
  • y_2023, m_9, d_24, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.35
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_26
  • loc_sv_SE, sid_jbleverest110ga, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_jbl
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 4ms
  • questions, product

Support